# Included Tools ## Tools Pre-Installed From v1.0.x * autossh * nmap * nc * wget * python From v1.1.x * arp-scan * hping3 * macchanger * ngrep * nping * p0f * tcpdump ## Installing Additional Tools In order to install additional tools the Shark Jack will require an Internet connection in Arming Mode. Typically this is achieved by using the `NETMODE DHCP_CLIENT` command. Connect to the Shark Jack shell by SSH (or Serial in the case of the Shark Jack Cable) and plug it into a local network. Ensure that it has Internet connection (e.g. `ping -c4 1.1.1.1`). If it does not, use the `NETMODE` command above to establish an Internet connection via DHCP. Update the package manager with `opkg update`. Using the `opkg list` command you may find the name of the package you wish to install. Finally, install the package with the command `opkg install `. ### Example ``` root@shark:~# opkg install httping Installing httping (2.5-1) to root... Downloading http://downloads.openwrt.org/releases/18.06-SNAPSHOT/packages/mipsel_24kc/packages/httping_2.5-1_mipsel_24kc.ipk Configuring httping. root@shark:~# httping No URL/host to ping given root@shark:~# httping example.com PING example.com:80 (/): connected to 93.184.216.34:80 (43 bytes), seq=0 time= 27.99 ms connected to 93.184.216.34:80 (357 bytes), seq=1 time= 18.41 ms connected to 93.184.216.34:80 (351 bytes), seq=2 time= 17.20 ms connected to 93.184.216.34:80 (43 bytes), seq=3 time= 17.45 ms connected to 93.184.216.34:80 (43 bytes), seq=4 time= 17.35 ms connected to 93.184.216.34:80 (43 bytes), seq=5 time= 17.39 ms ^CGot signal 2 --- http://example.com/ ping statistics --- 6 connects, 6 ok, 0.00% failed, time 5946ms round-trip min/avg/max = 17.2/19.3/28.0 ms root@shark:~# ``` Learn more about using the opkg package manager from the OpenWRT documentation at