Status LED

The blinking-lights are not for finger-poking

On the front of the Packet Squirrel is the status LED.

This multi-color LED reflects the system status, and can be customized by payloads.

LED status modes

The Packet Squirrel is booting.

The first time the Packet Squirrel boots will take several minutes while it configures the internal storage and generates unique SSH keys.

Future power-ups of the Packet Squirrel will take significantly less time.

The Packet Squirrel is in first-time setup mode; connect to http://172.16.32.1:1471 to start!

The Packet Squirrel is in arming mode; connect to http://172.16.32.1:1471 or ssh to http://172.16.32.1 to configure your device.

The Packet Squirrel detected a USB storage device, but could not mount it. Check that it has a supported filesystem!

The Packet Squirrel could not find a payload for this switch position. Set your Packet Squirrel to Arming Mode and make sure a payload is present!

Payloads can configure the LED to many other colors and patters, check your payloads for more information!

Last updated 3 years ago